Honeywell ADEMCO LYNXR-EN, Руководство пользователя

Страница: 10 / 64

– 10 –
QUICK VIEW OF SYSTEM FUNCTIONS QUICK VIEW OF SYSTEM FUNCTIONS QUICK VIEW OF SYSTEM FUNCTIONS QUICK VIEW OF SYSTEM FUNCTIONS
REMOTE PHONE CONTROL OPERATION
To remotely disarm: ---------------------
+ [1]
To remotely arm in AWAY mode: -
+ [2]
To remotely arm in STAY mode: --
+ [3]
To remotely arm in AWAY or STAY mode with NO DELAY:
+ [2] or [3] + [0]
To remotely activate X10 devices 1-6: ----------
[#] + [4] + device no
.
To remotely activate X10 devices 7 & 8: ------
+ [#] + [4] + device no.
To remotely deactivate X10 devices 1-6: ------
[#] + [7] + device no.
To remotely deactivate X10 devices 7 & 8:
+ [#] + [7] + device no.
To remotely bypass a zone: ----------
+ [6] + zone no.
To remotely activate forced bypass: ------------
+ [6] + [#]*
To remotely check system status: -
[*]
To hang up: ----------------------------------
+ [9]
*If forced bypass was enabled by your installer.
OTHER FUNCTIONS
To set the time and date: --------------
+ FUNCTION + [63]
To set scheduling: ------------------------
+ FUNCTION + [64]
To activate X10 devices 1-6: ---------
FUNCTION + LIGHTS ON + device number
To activate X10 devices 7 & 8: ------
+ FUNCTION + LIGHTS ON + device number
To deactivate X10 devices 1-6: -----
FUNCTION + LIGHTS OFF + device number
To deactivate X10 dev. 7 & 8: --------
+ FUNCTION + LIGHTS OFF + device number
To add a user code: ---------------------
** + CODE + user no. (02-08)+ user code
To delete a user code
(except Master Code)
:
** + CODE + user number (02-08)
To turn Test mode on: ------------------
+ TEST
To turn Test mode off: -----------------
+ OFF
To use the defined AUX function: -
Press and hold AUX key 2 seconds (4 beeps) +
To send message to pager: ------------
Press and hold AUX key 2 seconds (4 beeps)
To program “Follow Me” reminder phone #:
+ FUNCTION + [65] + Enter up to 24
digits
To delete “Follow Me” reminder phone #:
+ FUNCTION + [65]
** Only the master code can be used to add or delete another user code.