Honeywell ADEMCO 745VSD3 Скачать руководство пользователя

Страница: 4 / 4

- 4 -

745VSD3 SPECIFICATIONS

Physical Specifications

Measurements:

4” x 2-3/4” x 1-3/4”

Electrical Specifications

Voltage Requirements:

12-16 VDC

Current (Standby):

15mA

Speaker Specifications

Note: Use 8-ohm, 16-ohm, or 32-ohm, 15 watt speakers
8-ohm Speaker:

1400mA (max, steady siren)

16-ohm Speaker:

1050mA (max, steady siren)

32-ohm Speaker:

500mA (max, steady siren)

WARRANTY INFORMATION

For the latest warranty information, please go to:

http://www.security.honeywell.com/hsc/resources/wa/index.html

REFER TO THE INSTALLATION INSTRUCTIONS FOR THE CONTROL
PANEL THAT IS USED WITH THIS DEVICE FOR WARRANTY
INFORMATION AND LIMITATIONS OF THE ENTIRE ALARM SYSTEM.

2 Corporate Center Drive, Suite 100

P.O. Box 9040, Melville, NY 11747

www.honeywell.com/security

ÊK6210V1,Š

K6210V1 2/09 Rev C

Содержание ADEMCO 745VSD3

Страница 1: ...PUT Connect to 12VDC source on panel See Fused Method for Providing Battery Power on Page 3 if needed 3 SPKR 4 SPKR SPEAKER TERMINALS Connect 8 16 or 32 ohm 15 watt speaker See Figure 6 for multiple speaker config urations For Listed installations Listed Ademco 705 820 713 or 746 32 speakers must be used 5 F FIRE INPUT Connect the control panel s output designated as the FIRE steady output to this...

Страница 2: ...on Off selection 0 Output Number Select 17 7 Exit the panel s Programming mode 2 ANNUNCIATING CO ALARM ON VISTA 32 128 250 and variants a Hookup If using a VISTA 32 128 250 or other variant that supports CO Zone Response Type 14 Configure 7845VSD3 for a positive 12V trigger by setting DIP Switch 8 to ON On the panel configure a relay output 4204 4101SN to alert on Zone Response Type 14 Connect 745...

Страница 3: ...tches 5 8 SW1 switches 5 through 8 set bell test and trigger options as shown 2 3 4 5 6 1 ON 7 8 BELL TEST RINGBACK OPTIONS MUST BE ON FOR LISTED INSTALLATIONS BURG FIRE TRIGGER ON POSITIVE 12V TRIGGER OFF NEGATIVE 0V TRIGGER FIRE TRIGGER ON POSITIVE 12V TRIGGER OFF NEGATIVE 0V TRIGGER CARBON MONOXIDE TRIGGER ON POSITIVE 12V TRIGGER OFF NEGATIVE 0V TRIGGER 745VSD3 005 V0 Figure 4 SW1 Switches 5 8 ...

Страница 4: ...peaker 500mA max steady siren WARRANTY INFORMATION For the latest warranty information please go to http www security honeywell com hsc resources wa index html REFER TO THE INSTALLATION INSTRUCTIONS FOR THE CONTROL PANEL THAT IS USED WITH THIS DEVICE FOR WARRANTY INFORMATION AND LIMITATIONS OF THE ENTIRE ALARM SYSTEM 2 Corporate Center Drive Suite 100 P O Box 9040 Melville NY 11747 Copyright 2009 ...

Результаты поиска

Содержание ADEMCO 745VSD3

Отзывы:

Похожие инструкции для ADEMCO 745VSD3

Бренды по названию

Популярные бренды

Honeywell ADEMCO 745VSD3, Инструкция по установке и настройке

Результаты поиска

Содержание ADEMCO 745VSD3

Отзывы:

Похожие инструкции для ADEMCO 745VSD3

Бренды по названию

Популярные бренды