Honeywell 3G SmartVFD HVFD3D2A0020, Инструкция по установке и эксплуатации

Страница: 97 / 127

91 31-00559-01
Table 8.16. Torque Characteristics Frame D.
8.4 Ambient Conditions
Table 8.17. Environment.
8.5 Cable Specifications
Table 8.18. Cable lengths and cross-sections for control cables.
Starting torque (Constant torque)
maximum 150% for 60 s
1, 2
Overload Torque (Constant torque)
maximum 150% for 60 s
1, 2
1) Percentage relates to the nominal current of the drive.
2) Once every 10 minutes.
Enclosure Ratings NEMA1/IP21 (All Frame Sizes)
NEMA12/IP55 (Frame A, B, C)
NEMA12/IP54 (Frame D)
Vibration Test 1.0 g
Max. relative Humidity 5%-93% (IEC 721-3-3; Class 3K3 (non-
condensing) during operation
Aggressive environment (IEC 60068-2-43) H2S
test class Kd
Ambient temperature Max 122°F [50°C] (24-hour average maximum
113°F [45°C])
Derating for high ambient temperature, see special conditions in the Design Guide
Minimum ambient temperature during full-scale
operation 32°F [0°C]
Minimum ambient temperature at reduced
performance 14°F [-10°C]
Temperature during storage/transport -13°-+149/158°F [-25-+65/70°C]
Maximum altitude above sea level without
derating 3,300 ft [1000 m]
Derating for high altitude, see special conditions in the Design Guide
EMC Standards, Emission EN 61800-3
EMC standards, Immunity EN 61800-3
Maximum motor cable length, shielded/armored 500 ft [150 m]
Maximum motor cable length, unshielded/unarmored 1,000 ft [300 m]
Maximum cross-section to motor, mains, load sharing, and brake See Chapter 8.1 Electrical Data
Maximum cross-section to control terminals, flexible/ rigid wire
without cable end sleeves
16 AWG [1.5 mm
2
]
Maximum cross-section to control terminals, flexible wire with
cable end sleeves
18 AWG [1 mm
2
]