Honda WB20XT2, Руководство пользователя

Страница: 120 / 132

13-9
dummyhead dummyhead
WB20XT2•WB30XT2 CRANKCASE
PISTON RING WIDTH
Measure each piston ring width.
If any of the measurements is less than the service limit,
replace the piston rings (top, second, oil) as a set (page
13-5).
PISTON RING END GAP
Before inspection, check whether the cylinder sleeve
I.D. is within the specification (page 13-6).
Measure each piston ring end gap using a feeler gauge.
If any of the measurements is more than the service
limit, replace the piston rings (top, second, oil) as a set
(page 13-5).
WB20XT2:
STANDARD:
Top: 0.950 – 0.970 mm (0.0374 – 0.0382 in)
Second: 0.940 – 0.960 mm (0.0370 – 0.0378 in)
SERVICE LIMIT:
Top: 0.93 mm (0.037 in)
Second: 0.92 mm (0.036 in)
WB30XT2:
STANDARD:
Top: 0.925 – 0.945 mm (0.0364 – 0.0372 in)
Second: 0.940 – 0.960 mm (0.0370 – 0.0378 in)
SERVICE LIMIT:
Top: 0.905 mm (0.0356 in)
Second: 0.92 mm (0.036 in)
WB20XT2:
STANDARD:
Top: 0.200 – 0.350 mm
(0.0079 – 0.0138 in)
Second: 0.350 – 0.500 mm
(0.0138 – 0.0197 in)
Oil (side rail): 0.2 – 0.7 mm
(0.01 – 0.03 in)
SERVICE LIMIT:
Top: 1.0 mm (0.04 in)
Second: 1.0 mm (0.04 in)
Oil (side rail): 1.0 mm (0.04 in)
WB30XT2:
STANDARD:
Top: 0.200 – 0.350 mm
(0.0079 – 0.0138 in)
Second: 0.350 – 0.500 mm
(0.0138 – 0.0197 in)
Oil (side rail): 0.10 – 0.35 mm
(0.004 – 0.014 in)
SERVICE LIMIT:
Top: 1.0 mm (0.04 in)
Second: 1.0 mm (0.04 in)
Oil (side rail): 1.0 mm (0.04 in)
[1]