Honda iGXV700, Руководство пользователя

Страница: 7 / 48

ENGLISH
7
ENGINE OIL
Oil is a major factor affecting performance and service life.
Use 4-stroke automotive detergent oil.
Recommended Oil
Use 4-stroke motor oil that meets or exceeds the requirements
for API service category SJ or later (or equivalent). Always check
the API service label on the oil container to be sure it includes the
letters SJ or later (or equivalent).
SAE 10W-30 is recommended for general use. Other viscosities
shown in the chart may be used when the average temperature
in your area is within the indicated range.
Oil Level Check
Check the engine oil level with the engine stopped and in a level
position.
1. Start the engine and let it idle for 1 to 2 minutes. Stop the
engine and wait for 2 to 3 minutes.
2. Remove the oil filler cap by turning it counterclockwise. Wipe
the dipstick clean.
3. Insert the dipstick into the oil filler neck as shown, but do not
screw it in, then remove it to check the oil level.
4. If the oil level is near or below the lower limit mark on the
dipstick, fill with the recommended oil to the upper limit mark.
Do not overfill.
Refer to "Recommended Oil".
5. Reinstall the oil filler cap securely.
Running the engine with a low oil level can cause engine
damage. This type of damage is not covered by the
Distributor’s Limited Warranty
.
AMBIENT TEMPERATURE
OIL FILLER CAP
UPPER LIMIT
LOWER LIMIT
DIPSTICK
Oil Change
Drain the used oil when the engine is warm. Warm oil drains
quickly and completely.
1. Place a suitable container below the engine to catch the used
oil, then remove the oil filler cap, drain bolt and sealing washer.
2. Allow the used oil to drain completely, then reinstall the drain
bolt and new sealing washer, and tighten the drain bolt
securely.
TORQUE: 45.0 N ∙ m (4.5 kgf ∙ m, 33 lbf ∙ ft)
Please dispose of used motor oil in a manner that is
compatible with the environment. We suggest you take used
oil in a sealed container to your local recycling center or
service station for reclamation. Do not throw it in the trash,
pour it on the ground, or pour it down a drain.
3. With the engine in a level position, fill with the recommended
oil to the upper limit mark on the dipstick.
Engine oil capacity:
Without oil filter replacement: 1.7 L (1.8 US qt, 1.5 lmp qt)
With oil filter replacement: 1.9 L (2.0 US qt, 1.7 lmp qt)
Running the engine with a low oil level can cause engine
damage. This type of damage is not covered by the
Distributor’s Limited Warranty
.
4. Reinstall the oil filler cap securely.
UPPER LIMIT
LOWER LIMIT
OIL FILLER CAP
OIL DRAIN BOLT
SEALING WASHER
(Replace)
DIPSTICK
37ZEB6010.fm Page 7 Tuesday, June 25, 2019 11:55 AM