Honda HSM1336i, Руководство пользователя

Страница: 50 / 144

48
OPERATION
Adjust the skids equally on both sides.
Be sure to tighten the skid and scraper bolts securely after making
adjustment.
Do not use the snow blower on rough or uneven surfaces with the
auger ground clearance set for hard snow or surfaces.
This may cause serious damage to the snow blowing mechanism.

Adjust the skids and scraper in the following cases
• When the auger interferes with the road surface while it is turning.
• When clearing the snow from a gravel road or surface:
Raise the auger approximately 0.5 in (12 mm) from the ground
and secure the skid in this position.
Secure the scraper by raising it 0.3 in (7 mm) from the ground.
Do not clear the snow thoroughly from the ground. Leave some
on the ground to prevent gravel and other foreign material being
caught in the auger.
• When the snow is too hard to dig in, making the snow blower rise
on the snow:
Raise the skids and scraper to the uppermost position of the
adjustment range with the auger in contact with the ground, and
secure the skids and scraper in position.
Note that the road surface can be damaged and stones can be thrown
out of the auger if it comes in contact with the ground. Return the
skids and scraper to the original position when operating the snow
blower under normal conditions.
SKID
AUGER
SCRAPER
0.3 in (7 mm) min. Approx. 0.5 in (12 mm) min.
SKID
AUGER
SCRAPER
Raise to the uppermost
position.
31V15621.book 48 ページ ２０１８年１０月１０日 水曜日 午前１１時４分