Honda HSM1336i, Руководство пользователя

Страница: 115 / 144

113
TRANSPORTING
LOADING
1. Start the engine and raise the auger fully by operating the auger
control switch. Lower the chute guide fully by operating the chute
control switch.
2. Before backing up the loading ramp, adjust the position and angle
of the travelling direction of the snow blower so that the snow
blower is in direct alignment with the loading ramp.
3. Set the main shift lever in the SLOW RANGE, and back the
snow blower up the loading ramp at a slow speed.
Use reverse gear to back the snow blower up the ramp. Use
extreme care not to hit the dischage chute against the hood or any
other parts of the truck.
Do not hang the snow blower.
Hanging the snow blower could cause damage.
Spilled fuel may ignite. To avoid fuel
and oil spillage, keep the snow blower
level when transporting.
Do not operate the steering lever while
backing the snow blower up the loading
ramp; serious personal injury or damage
to the snow blower could result.
REVERSE
DOWN
UP
H L
5 ft (1.5 m)
minimum
headroom
31V15621.book 113 ページ ２０１８年１０月１０日 水曜日 午前１１時４分