Honda HSM1336i, Руководство пользователя

Страница: 52 / 144

50
OPERATION
Auger Housing Height
1. Operate the auger housing control switch back and forth. The auger
housing height can be adjusted without discrete steps.
To raise: Pull the auger housing control switch to UP.
To lower: Push the auger housing control switch to DOWN.
2. Release the auger housing control switch, and the auger housing is
secured in the position.
HIGH: Use this position when clearing the snow in steps and
use it when reversing or driving the snow blower. (When
the mode selector switch is in AUTO or POWER, use this
position when reversing the snow blower.)
MIDDLE: Position for normal clearing. (Use this position to clear
the snow normally.)
LOW: Position for clearing hardened snow. (Use this position
when the snow you are to clear is hardened and the
snow clearing part of the snow blower tends to get
raised.)
HIGH (UP)
MIDDLE
LOW (DOWN)
AUGER HOUSING
AUGER HOUSING
CONTROL SWITCH
DOWN
UP
31V15621.book 50 ページ ２０１８年１０月１０日 水曜日 午前１１時４分