Honda EZ6500CXS, Руководство по ремонту

Страница: 32 / 57

SEAL TAPE
8) Remove the Generator rotor bolt of the rotor.
Generator rotor bolt (M10 × 275L) (1)
Hold the rotor using a commercially available
strap wrench.
Loosen the Generator rotor bolt.
9) Use a bolt and oil as a tool for pulling out rotor
in the following procedures:
Pour engine oil into the center hole of rotor
shaft. Fill with oil to the shaft end.
Size: M12 × 1.75
Apply a few turns of seal tape around the tip of
the bolt.
Use commercially available 0.1mm thick
and oil resistant seal tape.
Screw the bolt into the thread of the rotor shaft.
Torque the bolt using a socket wrench until the
rotor comes off loose.
* The hydraulic pressure inside the rotor shaft
takes apart the rotor from the engine shaft.
32