Honda EU10iT1, Руководство пользователя

Страница: 40 / 138

3-7
dummyhead dummyhead
MAINTENANCE
COMBUSTION CHAMBER CLEANING
Remove the piston/connecting rod assembly (page 15-
3).
Prepare a cylinder of a thick paper or equivalent
material [1], which diameter is as large as the inner wall
of the cylinder, and insert the paper into the cylinder.
Attach the special tool to an electric drill and clean any
carbon deposits from the combustion chamber.
• Be sure to insert a thick paper into the cylinder to
protect the inner wall of the cylinder during clearing
of the combustion chamber.
• Do not press the cleaning brush with force against
the combustion chamber.
FUEL TANK AND FILTER CLEANING
Drain the fuel from the fuel tank [1] and carburetor.
Remove the side cover (page 5-3).
Disconnect the fuel tube [2] from the fuel tank, and
remove the fuel filter [3].
Clean the fuel filter and fuel tank with non-flammable
solvent, and allow it to dry thoroughly.
Check the screen of the fuel filter for contamination or
damage.
Replace if necessary.
Install the fuel filter into the fuel tank, and connect the
fuel tube.
Install the removed parts in the reverse order of
removal.
After installation, check for any signs of fuel leakage.
TOOL:
Cleaning brush [2]
07998-VA20100
[1]
[2]
Gasoline is highly flammable and explosive. You
can be burned or seriously injured when handling
fuel.
• Keep heat, sparks, and flame away.
• Handle fuel only outdoors.
• Wipe up spills immediately.
[1]
[2]
[3]