background image

Current customer service contact information: 

 
United States, Puerto Rico, and U.S. Virgin Islands: 

Honda Power Equipment dealership personnel are trained professionals. They should 
be able to answer any question you may have. If you encounter a problem that your 
dealer does not solve to your satisfaction, please discuss it with the dealership's 
management. The Service Manager or General Manager can help. Almost all problems 
are solved in this way.  

If you are dissatisfied with the decision made by the dealership's management, contact 
the Honda Power Equipment Customer Relations Office. You can write: 

American Honda Motor Co., Inc. 
Power Equipment Division 
Customer Relations Office 
4900 Marconi Drive 
Alpharetta, GA 30005-8847 

Or telephone: (770) 497-6400 M-F, 8:30 am - 7:00 pm EST 

When you write or call, please provide the following information: 

  Model and serial numbers 

  Name of the dealer who sold the Honda power equipment to you 

  Name and address of the dealer who services your equipment 

  Date of purchase 

  Your name, address, and telephone number 

  A detailed description of the problem 

 

Содержание EB6500






















































Отзывы: