Honda CRF250X 2006, Руководство пользователя и соревновательное пособие

Страница: 78 / 180

Piston/Piston Rings/Piston Pin
Cylinder Head Removal
1. Clean the area above the engine before
disassembly to prevent dirt falling into the
engine.
2. Drain the engine oil (page 44).
3. Drain the radiator coolant after cooling the
motorcycle (page 139).
4. Remove the seat and fuel tank (page 37).
5. Lift the subframe to the upright position (page
39).
6. Remove the carburetor (page 128).
7. Remove the exhaust pipe (page 64).
8. Disconnect the air suction (1) and vacuum
hoses (2) (california only).
9. Remove the air supply pipe bolt (3), PAIR
control valve bolts/nuts (4) and PAIR control
valve (5) (california only).
(1) air suction hose (4) PAIR control valve bolts/nuts
(2) vacuum hose
(5) PAIR control valve
(3) air supply pipe bolt
10.Disconnect the direct ignition coil (5).
11.Remove any dirt around the spark plug base.
(5) direct ignitioncoil
12.Remove the cylinder head cover (page 66).
13.Remove the spark plug (6).
(6) spark plug
14.Position the piston to top dead center on the
compression stroke (page 66).
Remove the cam shaft (page 68).
15.Loosen the radiator hose clamp (7) and
disconnect the radiator hose (8).
(7) radiator hose clamp
(8) radiator hose
(1)
(4)
(2)
(3) (5)
(5)
(6)
(8)
(7)
74
Servicing Your Honda