Honda CB Hornet 160R, Руководство пользователя

Страница: 59 / 85

Honda Motorcycle & Scooter India Pvt. Ltd.
53 CB Hornet 160R
Adjustment:
Drive chain slack should be checked and
adjusted if necessary at every 1,000 km
(600 miles). When operated at sustained
high speeds or under conditions of frequent
rapid acceleration, the chain may require
more frequent adjustment.
If the drive chain requires adjustment, the
procedure is as follows:
1. Place the vehicle on its center stand
with the transmission in neutral and the
ignition switch OFF.
2. Loosen the “Rear Axle Nut” (1)
3. Loosen the “Drive Chain Lock Nuts” (2).
4. Turn both “Drive Chain Adjusting Nuts”
(3) an equal number of turns until the
correct drive chain slack is obtained.
Turn the adjusting nuts clockwise to
tighten the chain, or counterclockwise
to provide more slack.
Align the chain adjuster “Index Marks”
(4) with the “Rear Edge of Adjusting
Slots” (5) on both sides of the swingarm.
(3)
(3)
(2)
(2)
(2)
(1)
(1)
(3)
(1) Rear Axle Nut
(2) Drive Chain Lock Nuts
(3) Drive Chain Adjusting Nuts
(4) Index Marks
(5) Rear Edge Of Adjusting Slot
(5)
(4)
(4)
(4)
(5)
(5)
In case of Drum In case of Disc