Honda CB Hornet 160R, Руководство пользователя

Страница: 53 / 85

Honda Motorcycle & Scooter India Pvt. Ltd.
47 CB Hornet 160R
SPARK PLUG
Refer to the Safety Precautions on page 40.
Recommended plug:
Standard:
CPR8EA - 9 (NGK)
4. Check the “Spark Plug Gap” (3) using
a wire-type feeler gauge. If adjustment
is necessary, bend the “Side Electrode”
(4) carefully.
The gap should be:
0.8-0.9 mm(0.03-0.04 in)
5. With the plug washer attached, the
spark plug in by hand to prevent
cross-threading.
(1) Spark Plug Cap
(2) Spark Plug Wrench
(2)
(1)
NOTICE
1. Disconnect the “Spark Plug Cap” (1)
from the spark plug.
2. Clean any dirt from around the spark
plug base.
Remove the spark plug using the “Spark
Plug Wrench” (2) furnished in the tool kit.
3. Inspect the electrodes and center
porcelain for deposits, erosion or
carbon fouling. If the erosion or deposit
is heavy, replace the plug. Clean a
wetfouled plug with a plug cleaner,
otherwise use a wire brush.
Never use a spark plug with an improper
heat range. Severe engine damage could
result.