29
3. However, you MUST check the fluid level before each operating. If not
filled, proceed with the following steps:
1) Remove the vented reservoir dipstick, which is located in front of the
engine on top of the reservoir tank.
2) Check the fluid level using the dipstick.
WARNING
• Much of the original fluid has been drawn into the cylinder and hoses.
Make certain to refill the reservoir to prevent damage to the hydraulic
pump. DO NOT overfill.
NOTICE
• The log splitter is shipped without hydraulic fluid in the reservoir.
Use the hydraulic oil your dealer provides, or buy the hydraulic oil
recommended below.
• Approved fluids include Shell Tellus® S2 M 32 Hydraulic Fluid,
Dexron® III / Mercon® automatic transmission fluid, Pro-Select™
AW-32 Hydraulic Oil or 10WAW-ISO viscosity grade 32 hydraulic
oil. It is not recommended that fluids be mixed, to top off the reservoir
tank during initial set-up use Shell Tellus® S2 M 32 Hydraulic Fluid
only.
SET-UP
