When not using the lower
anchorages system, all child
restraint systems must be secured to
the vehicle with the lap part of a lap/
shoulder belt.
In addition, the lap/shoulder belts in
the back seating positions and the
front centre seat have a lockable
retractor that must be activated to
secure a child restraint system.
The seat belt with a lockable
retractor has a label as shown in the
illustration above.
To properly route a lap/shoulder belt
through a child restraint system,
follow the restraint system maker’s
instructions.
For EU countries, refer to page
for installing a child restraint
system.
The procedures in the following
pages are described based on a child
restraint system available in EU
countries.
Place the child restraint system in
the desired back seating position
or front centre position. Make
sure the child restraint is
positioned well back in the seat-
back.
If you install the child restraint
system to the front centre seat,
position the rear centre seat at least
one position back. Then, position the
front centre seat to its rearmost
position.
1.
46
Installing a Child Restraint System
Driver and Passenger Saf ety
Installing a Child Restraint
System with a Lap/Shoulder Belt
52
SEAT BELT
LABEL
06/10/30 16:49:00 32SJD620_055
Содержание automobile
