Honda automobile, Руководство пользователя

Страница: 314 / 353

Look for any obvious coolant leaks,
such as a split radiator hose.
Everything is still extremely hot,
so use caution. If you find a leak, it
must be repaired before you
continue driving (see
on page ).
If you don’t find an obvious leak,
check the coolant level in the
expansion tank (see page
).
Use gloves or a large heavy cloth
while removing the expansion
tank cap. Loosen the cap by
turning it 1/8 turn anticlockwise.
Stop and wait for any pressure in
the expansion tank to escape.
Then remove the cap by turning it
anticlockwise.
Start the engine and set the
temperature control to maximum.
Add coolant up to the MAX line on
the expansion tank. If you do not
have the proper coolant mixture
available, you can add plain water.
Remember to have the cooling
system drained and refilled with
the proper mixture as soon as you
can.
Put the expansion tank cap back
on tightly. Run the engine, and
check the temperature gauge. If it
goes back to the red mark, the
engine needs repair (see
on page ).
If the temperature stays normal,
check the coolant level in the
expansion tank. If it has gone
down, add coolant to the MAX
mark. Put the expansion tank cap
back on tightly.
If the expansion tank needs
coolant, you will have to add
coolant. Before doing that, turn
the ignition switch to the ON (II)
position and check the
temperature gauge. Remove the
expansion tank cap only if the
temperature gauge pointer has
come down to normal or below the
red mark and you do not hear any
bubbling or gurgling noise coming
from the cooling system.
5.
6.
7.
8.
9.
10.
11.
325
190
325
Emergency
Towing
Emergency Towing
If Your Engine Overheats (Diesel models)
Taking Care of the Unexpected
311
Removing the expansion
tank cap while the engine is
hot can cause the coolant to
spray out, seriously scalding
you.
Always let the engine and
radiator cool down before
removing the expansion tank
cap.
06/10/30 17:24:18 32SJD620_314