Honda activa 2009, Руководство пользователя, Страница: 74 / 85

66
NOTICE
Replacing a fuse with one that has a higher
rating greatly increases the chance of
damage to the electrical system.
If the replacement fuse of the same rating
burns out in a short time, there is probably
a serious electrical problem on your
scooter. leave the blown fuse in that circuit
and have your scooter checked by your
Honda dealer.
BULB REPLACEMENT
Refer to the Safety Precautions on page 44.
The light bulb becomes very hot while the
light is ON, and remain hot for a while after
it is turned OFF. Be sure to let it cool down
before servicing.
•
Be sure to turn the ignition switch OFF
when replacing the bulb.
• Do not use bulbs other than those
specified.
• After installing a new bulb, check that
the light operates properly.
HEADLIGHT BULB
1. Remove the headlight case (Ref. page
31).
2. Remove the dust cover (1).
3. Remove the bulb (4) while pressing
down the locking pin (3).
4. Install a new bulb in the reverse order
of removal.
• Install the dust cover with its
“TOP”mark (5) facing up.
(1) Dust cover ¼MLV doj½
(2) Screw ¼LØw½
(3) Locking Pin ¼ykWfdxa fiu½
(4) Headlight bulb ¼gsMykbZV cYc½
(5) “Top” mark ¼VkWi ekdZ½
(4)
(3)
(1)
(2)
(5)