Honda activa 2009, Руководство пользователя, Страница: 66 / 85

58
ENGINE IDLE RPM
Refer to the Safety Precautions on page 44.
The engine must be at normal operating
temperature for accurate idle speed
adjustment. Ten minutes of stop-and-go
riding is sufficient.
1. Warm up the engine, and place the
scooter on its center stand.
2. Lift up the body cover (Ref. page 29).
3. Connect a tachometer to the engine.
4. Adjust idle speed with the throttle stop
screw (1).
Idle speed (In neutral) :
1,700 ± 100 min
-1
(rpm)
(1) Throttle stop screw ¼FkzkWVy LVkWi LØq½
(A) Increase ¼c<+kuk½ (B) Decrease ¼?kVkuk½
(1)
Throttle screw
WHEEL REMOVAL
Refer to the Safety Precautions on Page 44.
Front Wheel Removal
1.
Place the scooter on its center stand.
2. Raise the front wheel off the ground by
pressing from rear side.
3. Remove the speedometer cable (1) by
pushing the tab (2).
Incase of Activa (Standard)
4.
Remove the front brake adjusting
nut (3) and remove the front brake
cable (4) from the brake arm (5).
Incase of Activa (Deluxe)
Remove the front brake both adjusting
nuts (3) and remove the front brake
both cables (4) from the brake arm (5).
5. Remove the front axle nut (6).
6. Remove the front axle (7), collar (8)
and the wheel.