Honda activa 2009, Руководство пользователя, Страница: 73 / 85

65
Fuse Holder:
The fuse holder is located near the battery.
The specified fuse is: 10A
1. Turn the ignition switch OFF before
checking or replacing the fuses to
prevent an accidental short-circuit.
2. Remove the front center cover (Ref.
page 30).
3. Open the fuse holder (1) and lift out
the fuse (3) from the clips (4).
4. Slide the old fuse out of the clips and
discard it.
5. Slide the clips onto the ends of the new
fuse, push them back into the fuse
holder, and close the fuse holder. The
spare fuse (2) is located in the fuse
holder.
Do not pry the clips open to get a fuse
out; you could bend them and cause
poor contact with the new fuse. A loose
fuse could cause damage to the
electrical system and even cause a fire.
6. After replacing the fuse be sure to return the
fuseholder to its original location.
(1) Fuse holder ¼¶;wt gksYMj½
(2) Spare fuse ¼Lis;j ¶;wt½
Removal
(2)
(1)
Slide
Installation
Push
7. Install the fuse holder and front center
cover.
If you do not have a replacement fuse with
the proper rating for the circuit, install one
with a lower rating.
(2)
(1)
(3)
(4)
(3)
(3) Fuse ¼¶;wt½
(4) Clips ¼fDyIl½
(4)