−
−
If you do not like the stations Auto
Select has stored, you can store
other frequencies in the preset bars.
Use the TUNE, SEEK, or SCAN
function to find the desired
frequencies, then store them in the
selected preset bars as described
previously.
Auto Select does not erase the
frequencies that you set previously.
When you return home, turn off
Auto Select by pressing the A. SEL
button. The preset bars will then
select the frequencies you originally
set.
If you are
traveling far from home and can no
longer receive the stations you
preset, you can use the Auto Select
feature to find stations in the local
area.
To activate Auto Select, press the
A. SEL button. A. SEL will flash in
the display, and the system will go
into scan mode for several seconds.
It automatically scans both bands,
looking for stations with strong
signals. It stores the frequencies of
six AM stations and twelve FM
stations in the preset bars (1
6).
You can then use the preset bars to
select those stations.
If you are in a remote area, Auto
Select may not find six strong AM
stations or twelve strong FM stations.
If this happens, you will see a ‘‘0’’
displayed when you press the left or
right side of any preset bar that does
not have a station stored.
For information, see page
.
Once a station’s frequency is stored,
simply press and release the left or
right side of the proper preset bar to
tune to it.
The preset frequencies will be lost if
your car’s battery goes dead, is
disconnected, or the radio fuse is
removed.
194
Audio System
Comf ort and Convenience Features
AUTO SELECT
Radio Frequencies and Reception
151
