−
If you are training the second or
third buttons, go directly to Step 1.
Unplug the garage door opener
motor from the house current.
Before you can use HomeLink to
operate devices around your home, it
must ‘‘learn’’ the proper codes. For
example, to train HomeLink to open
and close the garage door:
Hold the end of the garage door
opener remote control 2 to 5
inches from HomeLink. Make
sure you are not blocking your
view of the red light in HomeLink.
Select the HomeLink button you
want to train.
Press the button on the remote
control and the button on
HomeLink at the same time. Hold
down both buttons.
If you just took
delivery of your car and have not
trained any of the buttons in
HomeLink before, you should erase
any previously learned codes before
training the first button. To do this,
press and hold the two outside
buttons on HomeLink for about 20
seconds, until the red light flashes.
Release the buttons, then proceed to
Step 1.
2.
3.
4.
1.
Training HomeLink
Bef ore you begin
HomeLink Wireless Control System
Comf ort and Convenience Features
218