Drain the coolant into an
appropriate container.
Install a rubber hose on the drain
bolt at the rear of the engine
cylinder block. Loosen the drain
bolt.
Remove the reserve tank
mounting bolt with a wrench.
Remove the reserve tank from its
holder by pulling it straight up.
Drain the coolant into an
appropriate container, then put the
tank back in its holder. Install the
mounting bolt securely.
5.
4.
6.
CONTINUED
6-cylinder models only
Cooling System
Maintenance
303
HOLDERS
RESERVE
TANK CAP
MOUNTING
BOLT
RESERVE
TANK
HOLDERS
6-cylinder models
RESERVE
TANK CAP
4-cylinder models
MOUNTING
BOLT
DRAIN BOLT
RUBBER HOSE
RESERVE TANK