© 2013 American Honda Motor Co., Inc. – All Rights Reserved.
AII 13148-49239 (1302)
23 of 27
99. Open the hood. Using isopropyl alcohol on a shop
towel, thoroughly clean the hood where the caution
label will attach.
Q0N2011AG
ADHESIVE
BACKING
Remove.
CAUTION
LABEL
HOOD
Clean with
isopropyl alcohol.
100. Remove the adhesive backing from the caution
label, and attach the caution label to the hood in the
area shown.
101. Check that all wire harness and cables are routed
properly and that all connectors are plugged in.
102. Reinstall all removed parts.
103. Reconnect the negative cable to the battery.
104. Check the operation of the headlights and wipers.
105. Press and hold the radio power button for two
seconds to restore the radio and navi (if equipped)
system functions.
106. Reset the clock on vehicles without navigation.
107. Proceed to the
REMOTE ENGINE STARTER
REGISTRATION
(Page 23) and
FUNCTION
CHECK
(Page 26).
REMOTE ENGINE STARTER REGISTRATION
1.
Acquire the PCM Code from ISIS.
792901AH
CAR ICON
2.
Connect the HDS tester to the OBD II data link
connector, then turn the ignition switch to the on (II)
position.
3.
Start the HDS, and click the car icon.
4.
Input the VIN and other required information into the
HDS, then click the check button.
752502AS
Input the VIN and other
required information.
CHECK BUTTON
