© 2013 American Honda Motor Co., Inc. – All Rights Reserved.
AII 13148-49239 (1302)
25 of 27
9.
The following message will display:
Obtain PCM
code (IMMOBILIZER PCM CODE) from iN. This
vehicle’s VIN will be required to obtain the
password (USA).
Click on the check button.
752507AS
“Obtain PCM-code”
message.
CHECK BUTTON
10. Input the PCM Code, then click the check button.
NOTE: To ensure security, the PCM code
(password) is changed everyday, so it is impossible
to register the remote control engine starter if the
dates of the PCM code acquisition and registration
are different. The date of the HDS tester should also
be the same.
752509AS
Input the PCM Code.
CHECK BUTTON
11. The following message will display:
The
registration of the Remote Control Engine
Starter Unit has been completed.
Click on the
check button.
752510AS
“The registration of the Remote
Control Engine Starter Unit has
been completed.”
CHECK BUTTON
12. The following message will display:
Check that the
engine can be started by the Transmitter.
Click on
the check button.
752511AS
“Check that the engine can be started
by the Transmitter.”
CHECK BUTTON
13. Perform the function test on page 26, then
disconnect the HDS.
