background image

1

INSTALLATION MANUAL

BEFORE INSTALLING THIS PRODUCT PLEASE READ

THIS INSTALLATION MANUAL THOROUGHLY!!

FM SECURITY AND

REMOTE START SYSTEM

This system is intended for installation on
vehicles equipped with automatic transmissions
and electronic fuel injection only!

DO NOT INSTALL THIS SYSTEM INTO A

MANUAL TRANSMISSION VEHICLE AS IT COULD

RESULT IN SERIOUS INJURY OR DEATH.

• This product must be installed by qualified
personnel according to these instructions and
and observing all safety features.

• The system should be placed into the valet
mode when parked inside a garage or being left
for service.

• Always notify service personnel that the
vehicle is equipped with a Remote Starter.

• Only start the vehicle in a well ventilated
area. Do not use in a closed garage or indoors.

ITEMS SUPPLIED WITH
THE SYSTEM :

• Main unit
• One 3-button remote control w/ LCD text 

display and background illumination*

• Plug In LED
• Plug in program switch
• Harness kit with 2 heavy duty fuse holders
• Hood Pin switch
• Extended range transceiver module 
• Dual Stage Electronic Shock sensor 
• 120dB 6-tone siren
• Owner’s manual
*

One or two transmitters provided depending      

on system purchased.

OPTIONAL ACCESSORIES:

• VAC-10  Vacuum Switch Kit 
• APP-1 Universal OEM transponder bypass kit
• APV-1 GM VATS, Passlock I&II bypass kit
• PDLM-3  Power door lock relay module

Содержание 250













Отзывы: