HOMMY ENTERPRISE (XINHUI) CO., LTD.
Model: HM116
22 - 32
about 5 seconds to lock keyboard, after that no
function press any button, press again (RUN) button
for 5 seconds to unlock the keyboard, the keyboard
resumes working. In lock keyboard mode, the
screen displaying as follows:
Warning message table
Error code
Cause
Checking
Indicator light
situation
ERROR 01
Ice
cream
freezing
in
cylinder
（
supercool
）
.
1. Little mixture feeding into cylinder,
or stirring shaft poor installation.
2. Ice cream hardness setting
inappropriate.
Flash
ERROR 02
Motor overload.
Check motor, thermal relay.
ERROR 03
Refrigeration
system
pressure too high.
Check refrigeration system.
ERROR 04
Hopper temperature sensor
faulty.
Sensor connector or sensor wiring loose
or damaged.
ERROR 05
Cylinder
temperature
sensor faulty.
Sensor connector or sensor wiring loose
or damaged.
ERROR 08
Reverse phase or lack
phase alarm.
Reverse the power input of which two
FireWire L1 and L2.
CORRECT USAGE METHOD
No.
Actual situation
Result
Correct usage method
1
Does not remove sealing
gaskets in cleaning.
Residue and oil remaining on
components can not be
completely washed.
Clean the removing sealing gaskets
with gauze.
2
To soak components in chlorine
solution for a long time.
Components are eroded can not
be used.
Use the specified lube.
3
Do not use the specified lube.
Components are difficult to
remove because oil stick hardly
on them.
Use the specified lube.
4
Do not coat lube on
transmission shaft.
Cause abnormal noise, and cause
material leaking.
Use the specified lube.
5
Do not coat lube on the sealing
gaskets (for throat block and
plugs).
Damage the sealing gaskets, and
cause material leaking.
Use the specified lube. (Don’t coat
lube to the sealing gaskets on the
back of throat block.)
6
Plastic scrapper is not securely
installed on stirring shaft.
Damage plastic scrapper and
drop down, and cause ice cream
dispensing not hard enough.
Re-install plastic scrapper on stirring
shaft according to the user manual.
06/09 10:15 ( Mon )
Cooling
（
LOCK
）
