HOMMY ENTERPRISE (XINHUI) CO., LTD.
17 - 32
Do not attempt to extract product or
remove the machine during the heating cycle,
at that time the mixture is very hot, and the
machine has high pressure.
(Note: When the heating cycle is finished, the
indicator light is still on. At that time, it
will enter into the last cycle
“pre-cooling overnight”. If needs to
stop it working at once, press (STOP)
button to do it.)
●
Usage method 8 (Daily startup
procedure)
Step 1: Prepare a few qualified disinfectant,
use warm water and follow the
manufacturer's specifications.
Step 2: Clean the area at the bottom of the
throat block with disinfected brushes.
Note: In order to ensure the disinfection
effect, use the brush to clean each part
for at least 1 minute, and constantly in
disinfectant for washing brush
Step 3: Wipe the throat block, the area at the
bottom of the throat block, the front
board and other area with water or
food accumulation.
Step 4: When the machine resumes working,
press (STOP) button (power switch),
and check whether there is error
message displaying on the keyboard
(If there is, must clear it and solve it
out
before
normal
working
procedures.).
After troubleshooting, enter into
normal refrigeration procedure to
make ice cream according to the
operation with Usage method 6.
●
Cleaning with brush tool
Step 1: Preparation of qualified cleaner /
disinfectant. Use warm water and
follow
the
manufacturer's
specifications
Step 2: To thoroughly clean all disassembled
parts with brushes in disinfectant
and clean liquid, be sure to remove
all of the oil and the slurry film. Be
sure to clean the surface of all parts
with brushes.
Clean all the parts with clean warm
water, place these parts on a clean
surface and dry all
Step 3: Take a little clean liquid into cylinder,
clean the rear bearing sleeve behind
the cylinder with brushes.
