Hommy HM116T, Руководство пользователя

Страница: 4 / 32

4
●Do not allow untrained
persons
to operate the
machine.
●Before disconnect the power supply, do
not disassemble the throat block, the
agitating shaft or transmission shaft.
●Do not dive objects or fingers into the
throat block discharge outlet.
NOTE:
Failure to follow these instructions
can lead to serious injury because of
dangerous moving parts.
Be careful when you
disassemble the agitating
shaft (disconnect the power
supply before the operation),
otherwise it may cause injury.
●Precaution before using the ice cream machine:
1. The machine is inevitably subject to shocks in the transportation and is used after
24 hours at best.
2. There are different adaptions of different models on environment temperature, and
it’s necessary to avoid the sun and be away from heat.
3. It is suggested that ice cream slurry should be kept at 25
℃。
4. The machine should be placed in good ventilation and on horizontal plane.
5. The rotation direction of the agitating shaft should be in clockwise when you face to
the machine.
6. The air inlet of the machine (left / right / back board) must be maintained proper
ventilation.
7. It’s best to clear the dirt on the condenser once a month.
8.
Notices for air-cooled machine:
Leaving a space about 50cm at least around the machine can make air move in.The
machine under part can not place anything, which can ensure cooling.
9. The machine can not work when it’s short of material in the hopper.
10. Please disconnect the power supply when the machine is not used for a long time.
●
Notices for the power line:
a) Power socket must be equipped with ground wire, or the ground wire must be
connected the connector which is near the power line and on the back of the machine.
b) The cross-sectional area of power line must be larger than 4.0 square millimeters