Hommy HM116T, Руководство пользователя

Страница: 25 / 32

25
Error code instruction
Error code Cause treatment
E1 Compressor is overloaded.
Check the compressor and thermal
relay.
E2 Motor is overloaded. Check the motor and thermal relay.
E3 Refrigeration pressure is too high. Check the refrigeration system
E4
The temperature sensor of hopper is
faulty. Check the connector and the wire of
sensor whether they are damaged.
E5
The temperature sensor of cylinder is
faulty. Check the connector and the wire of
sensor whether they are damaged.
E8 Lack of phase or phase dislocation Check the power and wire.
Note: When the sensor is contacted badly, the temperature sensor occurs disconnection.
Correct Usage
NO. Operation Result Treatment
1 when you wash the part, you
don’t remove the gasket and
wash it. some dregs and lube can
not be cleaned thoroughly. you should remove the gasket and
clean it thoroughly with towel.
2 The parts soak in
chlorine-containing disinfectant
for long time.
some parts are corroded
and damaged. Use the specified lube.
3 do not use the specified lube. the parts can not be
removed as the lube gets
hardened.
use the specified lube.
4 do not coat the lube on the
transmission shaft. it causes abnormal noise
and leaking slurry. use the specified lube.
5 do not coat the lube on the
gasket of plug. it damages the gasket and
causes leaking slurry. use the specified lube(the gasket of
throat block need not be coated
with lube)
6 the plastic scrappers are not
installed correctly on the stirring
shaft. it damages the plastic
scrapper and the ice cream
becomes soft.
install the plastic scrappers
correctly according to the
instruction.
7 the plastic scrappers are
over-wear.
it causes the ice cream
becomes soft replace the plastic scrappers
regularly.
8 do not install the plastic sleeve of
stirring shaft it damages the main parts install the plastic sleeve correctly