46
Operation
(installed) Homematic IP Access Point, as
described in the operating. Afterwards, please
proceed as described above to connect the blind
actuator.
6
Operation
Via the following push-buttons, simple operating
functions are available directly on the device:
• system button
(A)
• channel button
(B)
• select button
(C)
System button
By pressing the system button briefly (
see figure 5
), you
can activate the LCD background lighting of all devices
connected to the bus.
Channel button
By pressing the channel button briefly (
see figure 6
), you
can select the desired channel. On each button press,
you can switch to the next channel.
The selected channel is indicated by the flashing sym-
bol. The current height (
RX
TX
V
1 1
) and slats positions (
RX
TX
V
1 1
) of the
selected channel are shown in the display (alternating).
After switching on the blind actuator, the blinds/
shutters/awnings are in an unknown position.
