45
Start-up
mode of the blind actuator remains activated for
3 minutes.
You can manually start the teach-in mode for an-
other 3 minutes by pressing the system button
(A)
briefly
(see figure 5)
.
• Your device will automatically appear in the
Homematic IP app.
• To confirm, please enter the last four digits of the
device number (SGTIN) in your app or scan the
QR code. Therefore, please see the sticker sup-
plied or attached to the device.
• Please wait until teach-in is completed.
• If connecting was successful, the LED
(A)
lights
up green. The device is now ready for use.
• If the LED lights up red, please try again.
• Select the desired solution for your device.
• In the app, give the device a name and allocate
it to a room.
If you are already using Homematic IP devices in
your smart home system or if you want to
combine your Homematic IP Wired devices with
wireless Homematic IP components, you can
also connect the Homematic IP Wired devices to
an (installed) Access Point. Therefore, connect
the Homematic IP Wired Access Point to the
