Homematic IP HmIPW-BRC2, Инструкция по установке и эксплуатации

Страница: 39 / 49

39
Start-up
39) into the frame (see figure 5 or 6 ).
• Switch the Homematic IP Wired bus on again to
activate the teach-in mode of the device (see “5.4
Teaching-in” on page 39).
5.3 Adapters for brand switch systems
After installation, the existing frame and rocker of leading
manufacturers can continue to be used. In order to
achieve compatibility with as many manufacturers as
possible and make integration in the different designs
easier, the rocker adapters are available as accessories.
An overview of available adapters in available in the
download area of www.homematic-ip.com.
5.4 Teaching-in
Read this entire section before starting the
teach-in procedure.
Please refer to the Homematic IP Wired System
Manual for detailed information on setup and
control options.
To integrate the device into your system and enable
it to communicate with other devices, you must teach
it in first. You can use the following set-up and control
options: