6
7
Fig. 2
Night Light
Illuminated Ring
ON/OFF
Power/Mist Knob
Night Light ON/OFF
Button
Low Water Level
Indicator Light
How To Use
How to Fill
CAUTION:
Before filling unit with water, turn the power off and unplug the unit from the outlet.
NOTE:
Always use two hands to carry the water tank.
Power Knob
Plug unit in to a 120 volt AC electrical outlet. Turn the POWER knob clockwise to turn unit on.
ATTENTION:
When the water in the water tank is almost empty the low water level indicator
light will glow red and the power will shut off to indicate to the user to refill water.
Mist Adjustment Setting
To increase the mist output, turn the mist adjustment ( ) knob clockwise.
To decrease mist output, turn the mist adjustment knob counter-clockwise.
Low Water Level Indicator Light
This humidifier features a low water level indicator light. When the water level in the tank
becomes too low, a red light will illuminate on the front of the humidifier. When this happens,
turn the unit off, refill the water tank, and place it back on the unit. When you turn the unit on
again, the light will not be illuminated.
Night Light
Press the NIGHT LIGHT ( ) button to turn on the night light. The dial around the POWER/MIST
knob will illuminate.
1. Grasp tank handle and lift up from humidifier base.
(Fig. 3)
2. Turn the tank upside down—remove the tank cap by
turning it counter-clockwise. (Fig. 4)
3. Fill the water tank with clean, cool
tap water. We recommend using distilled water if you
live in a hard water area. (Fig. 5)
4. Replace the tank cap by turning clockwise until tight.
(Fig. 6)
5. Install the tank back on the base of the unit. Make sure
the tank is firmly seated. (Fig. 7)
NOTE:
It is normal to have a small amount of water in the
base during and after use.
Fig. 3
Fig. 5
Fig. 4
Fig. 6
Fig. 7
LOW WATER LEVEL
EV-HD15_Cool Warm Humidifier.ai 6/26/09 4:45:41 PM