Grounding Instructions
This product must be grounded. If it should malfunction or
breakdown, grounding provides a path of least resistance for
the electric current to reduce the risk of electric shock. This
product is equipped with a cord having an equipment-
grounding conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
DA N G E R
Improper connection of the equipment-grounding
conductor can result in a risk of electric shock. Check
with a qualified electrician or serviceman if you are in
doubt as to whether the product is properly grounded.
Do not modify the plug provided with the product - if it
will not fit the outlet, you may temporarily use an
adapter (such as the one shown in Figure B) until you
have a proper outlet (such as the one shown in Figure
C) installed by a qualified electrician.
This product is for use on a nominal 120-volt circuit, and has a
grounding plug that looks like the plug illustrated in
Figure A.
A temporary adapter that looks like the adapter illustrated in
Figure B
may be used to connect this plug to a 2-pole
receptacle as shown in
Figure D
if a properly grounded outlet
is not available. The temporary adapter should be used only
until a properly grounded outlet
Figure C
can be installed by
a qualified electrician. The tab for grounding screw
Figure B
extending from the adapter must be connected to a
permanent ground such as a properly grounded outlet box
c o v e r. Whenever the adapter is used, it must be held in place
by a metal screw.
S ee Fi g ures D a nd E.
Perfect Steam Fe a t u r e s
• Safe for use on all types of fabrics
• Quick heat-up feature emits steam in 1 minute
• Convenient integrated garment hanger
• Telescoping design for compact storage
• 5’ flexible hose with Safe Touch™ double insulation for safe and
comfortable handling
• Steam on Demand™ feature turns steam on & off with
the push of a button
• 3 nozzle accessories: Brush, Fabric Comb, and Lint Brush
• Easy-fill water tank provides up to 1 hour of continuous steam
• Rolling casters for excellent mobility
• Convenient drain at base
Assembly Instructions
1. Carefully remove all contents from packaging and inspect the
product to make sure all components have been received (Fig.
10).
2. Insert pole into top of unit. Match the grooves on the pole with the
notches in the pole connector and push down. Securely screw the
cap on the pole over the connector by turning it clockwise (Fig. 1).
3. To attach the hanger attachment, align tabs in plastic hanger with
grooves on pole and push down (Fig. 2).
4. Fully extend the telescopic pole. To do so open the 3 clips on the
pole and pull the pole upwards (Fig. 2). When fully extended
close the clips. Make sure that the pole is securely locked into
place and cannot be pushed downward.
5. Slide the nozzle over the handle until both sides of the handle
snap into place. (Fig. 3).
6 . Select the desired attachment you wish to use and snap into place
on the nozzle: Fabric Brush, Fabric Comb and Lint Brush.
7. You may hang the steamer handle on the hanger attachment.
(Fig. 5)
4
5
Figure A
Grounding Pin
Adapter
Tab for
Grounding
Screw
Figure B
Grounded
Outlet
Figure D
Figure C
Figure E
Metal Screw
Figure 1
Figure 2
Figure 3
Figure 4
Po l e
Tu r n
C l i p s
Plastic Hanger
PS300_SPENG 8/1/05 7:23 AM Page 5
