HOMCOM A90-194, Инструкция по сборке

Страница: 5 / 12

5
ASSEMBLY INSTRUCTIONS
easy steps to assemble then you’re ready to workout – it takes approx 30 mins to assemble.
STEP 1
a. Fix the Front Stabilizer (2) to Main frame (1) using 2 X M8*50 Bolts (3), 2 X Ø8 Flat Washers (4) and
2 X M8 Cap Nuts (5) provided by 13-15 Wrench (25).
b. Repeat Step a. to install Rear Stabilizer (6) to Main Frame (1).
c. Take out the pedals, divide the foot pedal (7) into RL, mark it in the direction of the arrow, rotate it
into the crank hole of the main frame (1), and tighten it with the tool (24).
note:
d. Right foot installation is clockwise
e. Left pedal installation is counterclockwise
STEP 2
a. Insert the Seat Support Tube (9) to the rear opening tube of the Main Frame (1).
b. Adjust the Seat Support Tube (9) to your desired height, then refit and tighten the Lock Knob.
c. Fix the seat (10) to the Horizontal Sliding Bar with the provided 13-15 Wrench (24) until tight.
Note
: The Horizontal Sliding Bar and the Cover for Seat are pre-fitted onto the Seat Support Tube .