Homburg Delta DE-M135, Руководство пользователя

Страница: 16 / 114

____________________________________________________________User manual Homburg Drain Cleaner type Delta
© Copyright HOMBURG HOLLAND
15
5.4 Drive (pto and cardan shafts)
•
Only use the universal cardan shaft that came with the machine or the one
prescribed by the manufacturer.
•
The pto or cardan shaft protection must always be mounted and in good condition.
•
Make sure the protective sleeve of the universal cardan shaft provides complete
protection in working position as well as in transport position.
•
Stop the tractor engine and take out the ignition key before mounting or dismounting
the cardan shaft.
•
If the cardan shaft is equipped with a slipping clutch or a freewheel clutch, then
mount it on the machine side.
•
Always make sure the universal cardan shaft is mounted and locked correctly.
•
Always make sure that the protective sleeve of the universal cardan shaft is locked
firmly in the rotating direction with the aid of lock chains.
•
Select the correct rpm for the cardan shaft before switching it on.
•
Check that there are no people or animals near the machine before switching on the
cardan shaft.
•
Switch off the cardan shaft when the angle with the machine or the tractor exceeds
the value prescribed by the manufacturer.
•
WARNING: When the cardan shaft has been switched of, the driven pump may
coast down a while. Never touch it while it is coasting down.
•
Place the cardan shaft in the special cardan shaft support when it is not in use.
Never let it hang on the lock chain.
•
After uncoupling the universal cardan shaft from the pto, the protective cover must
be placed back on the tractor pto.
•
Damaged and/or defective pto and cardan shaft covers must be replaced at once.
Only use original replacement parts.
•
Never stand on the cardan shaft or on the protective sleeve of the cardan shaft.
•
Always observe the cardan shaft instruction manual when working with the machine.