Homburg Delta DE-M135, Руководство пользователя

Страница: 60 / 114

____________________________________________________________User manual Homburg Drain Cleaner type Delta
© Copyright HOMBURG HOLLAND
59
21. Wear adequate eye protection (goggles). The flushing water leaving the
drainpipe under pressure may carry off small hard objects at high speed.
22. Put the end of the second roller bend in front of the drainpipe discharge opening.
This can be done by simultaneously operating the central and right-hand lever
(fig. 21B) (fig. 21C). If the steel cable is taut while the guide arm has to be moved
further down, the steel cable can be uncoupled using the carabine hook. That
changes the function of the central operating lever (fig. 21B). Do not forget to
couple the steel cable again using the carabine hook as soon as that is possible
again! If the drainpipe is under water, positioning the roller bend requires more
attention.
23. Drive the tractor a little forward or backward if the roller bend cannot be placed in
front of the drainpipe.
24. Apply the tractor parking brake.
25. Manually guide the flushing hose through the flushing hose guide and through
the drive wheels and pressure rolls.
26. Adjust the pressure roll clamping pressure using the adjusting lever (fig. 19 pt.
22). Do not set the clamping pressure too high.
27. Mount the end piece with guide basket and nozzle if necessary. Note! Do not
mount these until the hose has been fed through both roller bends.
28. Fix the roller bend using the supplied fixing pin (fig. 19 pt. 46), when the roller
bend has been positioned in front of the drainpipe. That will prevent the roller
bend from shifting while the flushing hose is being fed in and out. When working
on the opposite bank, the pin (fig. 19 pt. 32) that is fixed on the second roller
bend can be pushed into the bank to fix the end of the roller bend.
29. Put the wheel of the metres counter (fig. 23A) on top of the hose.