Holzstar FKS 315-1500 E, Инструкция по эксплуатации, Страница: 9 / 28

Setting up and connection
FKS 315-1500 E | Version 1.07 9
Fig. 11: Mount measuring bar and guide rail
Step 7: Screw the measuring strip B to the table A with
the screws 3. Then screw on the guide rail with
screws and nuts 1, 2.
Mounting the stop
Fig. 12: Mounting the stop
Step 8: Attach the stopper clip B to the guide rail C, then
attach stopper A to B.
Align the tables
Fig. 13: Align the tables
Step 9: Set the distance between A and B to less than 3
mm. Then tighten bolts 1 and 2. Place a guide
-
line on the steel table and the sliding table and
adjust the height with the screws 5 and 6, then
tighten the clamping screws 3 and 4.
Fig. 14: Align extension tables
Step 10: Place a guideline (A) on the steel table and ex
-
tension tables E and F and adjust the height.
Mount the suction hoses
Fig. 15: Mount the suction hoses
Step 1: Attach the 40 mm suction hose to the saw blade
guard with a hose clamp, then insert the hose
into the hose guide. Make sure that the hose
runs freely and that there is enough clearance
to the work surface.
Step 2: Attach the other end of the suction hose to the
suction connection on the machine housing
with a hose clamp.
Step 3: Attach the 100 mm suction hose to the suction
connection on the machine housing with a
hose clamp. Attach the other end of the suction
hose with a hose clamp to the intake manifold
of the extraction system.