Holzstar FKS 315-1500 E, Инструкция по эксплуатации, Страница: 15 / 28

Disposal, recycling of old equipment
FKS 315-1500 E | Version 1.07 15
Fig. 30: Loosen the engine screws
Step 5: Screw the 3 fixing screws of the engine approx. 3
mm out of the engine mount, so that the engine
still remains on the mount.
Step 6: With the help of the second person, unscrew the
3 nuts on the engine mount completely and re
-
move the engine
Step 7: Remove remnants of a worn drive belt with the
appropriate tool so that the drive belt fits well
into the grooves.
Step 8: Insert the drive belt into the engine mount
Step 9: The engine is put on and pulled in this position so
tight that there is still enough clearance to ad
-
just the drive belt clearance.
Step 10: Put on the spacer ring and secure the self-lock
-
ing nut with a washer
Step 11: Place a short bolt or similar between the base
frame and the motor mount. By turning the
height adjustment crank, you can vary the
height adjustment guide.
Step 12: First, the spacer sleeve must be inserted in the
right position shown with a bar iron or appropri
-
ate tool. Pull the drive belt upwards and insert
the belt pulley and place the drive belt in the
middle
Step 13: Now insert the saw blade spindle with the
feather key into the top of the motor mount.
Lightly tap the spindle into the bearing, tighten
the spindle with the hexagon socket screw,
tighten the threaded pin of the spacer sleeve.
10 Disposal, recycling of old equipment
In your own interests and in the interests of the environ-
ment, please ensure that all components of the machine
are disposed of in the proper and approved way.
10.1 Decommissioning
Disused machines must be decommissioned immedi-
ately to prevent misuse at a later point and putting the
environment or persons at risk.
Step 1: Remove all environmentally hazardous fluids
from the old unit.
Step 2: If necessary, dismantle the machine into mana
-
geable and usable assemblies and compo
-
nents.
Step 3: Guide the machine components and operating
materials to the appropriate disposal routes.
10.2 Disposal of electrical equipment
Note that electrical equipment contains a variety of recy-
cling-capable materials and also environmentally hazar-
dous components.
Please help to separate these components and dispose
of them responsibly. In case of doubt, contact your local
waste disposal authority. Consult a specialist disposal
agent for recycling if needed.
10.3 Disposing of lubricants
Lubricant manufacturers provide disposal information for
the lubricants used. If necessary, request product-speci-
fic data sheets.