Rev. 1.10
3 of ��
��to�e� 1�� �01�
Holtek 8051 e-Link Driver for Keil μVision User Manual
8-Bit 8051 Se�ies
Holtek 8051 e-Link Driver Instructions and Installation
Table of Contents
1
Holtek 8051 e-Link Driver Instructions and Installation
The Holtek 8051 e-Link driver is an AGDI interface debug adapter driver program which can be
embedded into an integrated development environment which supports an AGDI interface. It can be
used to assist users with rapid development of their application programs for Holtek’s 8051 series
MCUs.
The HT8051OCDS-ICE is composed of an e-Link, for the HT8051OCDS, and a target board
(with EV). The e-Link is a Holtek new generation OCDS structure in-circuit debug adapter which
provides customers with a development tool to directly debug their application boards. An OCDS
interfaced MCU is required on the application board.
As for the software, an integrated develop environment supporting the AGDI interface is necessary,
such as the Keil
TM
μVision, to develop the Holtek’s 8051 series MCU programs.
This user manual describes the way to use the e-Link Driver and the Holtek Database in the Keil
TM
μVision environment as well as any relevant details regarding the HT8051OCDS-ICE.
