AN-6130PCIe
HOLT INTEGRATED CIRCUITS
2
Evaluation Kit Contents
•
This Application Note, AN-6130PCIe User’s Guide.
•
Holt API library software and user manual.
•
ANSI C HI-6130PCIe test demo project.
•
ANSI C HI-6130 PCIe API demo project.
•
9 Pin-D to MIL-STD-1553 BNC breakout cable.
•
Full size PCI card optional bracket.
•
CPLD Verilog project files.
•
CD-ROM containing supporting documentation and software.
Topics:
•
Introduction
•
Quick Start Guide
•
Hardware
•
Programming Reference
•
Software
•
Customization
•
Summary
•
Schematics and BOM
Board Default Setup:
Set SW2 position 6 set to Off (up) position
.
This sets the HI-6130 input pin AUTOEN low which is
required for the demos to work properly. See the picture below.
JP6 and JP7 will be open. Optionally jumper these when necessary to have the negative side of the bus
transformers (nXBUS) grounded for testing purposes.
JP2-JP5 are not used or installed. See the PLX PEX8311 PCI Express documentation for usage.
