11
15
Coagulation Mode Function Select Button:
It is for selecting Coag, Fulgurate, or
Bipolar function.
16
Blue Light (Coag) Indicator:
The indicator illuminates when Coag function has been
selected.
17
Blue Light (Fulgurate) Indicator:
The indicator illuminates when Fulgurate function
has been selected.
18
Blue Light (Bipolar) Indicator:
The indicator illuminates when Bipolar function has
been selected.
19
Output Power Intensity Indicator for Coagulation Mode:
The default state is zero
when On/Off power switch is turned on. The output power will remain at the selected
level unless it is changed. The number displayed indicates the relative power, which
will be delivered to the patient when the mode is activated. For true output power, see
figures in Section 7.
20
Power-up Button for Coagulation Mode:
A single depression of the button switch
increases the power setting by one. Continuous depression gradually increases the
power to maximum - 100.
21
Power-down Button for Coagulation Mode:
A single depression lowers the power
setting by one. Continuous depression gradually decreases the power to minimum - 0.
22
Yellow Energized Indicator:
The Yellow energized indicator will be ON when
CUTTING MODE circuit is energized.
23
Blue Energized Indicator:
The Blue energized indicator will be ON when
COAGULATION MODE circuit is energized.
4.3
SYMBOL DEFINITIONS
4.3.1
Type BF defibrillator protection
4.3.2
Refer to manual
4.3.3
Protective earth connection
4.3.4
Neutral electrode referenced to ground
4.3.5
Fingerswitch control
4.3.6
Footswitch control
4.3.7
Neutral plate
NOTE: To prevent cross-contamination, Cynosure highly recommends the
use of disposable electrodes and accessories.
