10
Units are shipped from the factory with default power levels of 0 and modes of
Cut and Hemo. To modify default values, simultaneously press and hold the
Cutting Mode and Coagulation Mode Select buttons while turning on the unit.
When CLR is displayed release the buttons and select the desired settings. Turn
off power.
Fault LED Indicator:
The Fault LED Indicator will be Red if any error is detected; otherwise, it is Green.
3
Neutral Plate Receptacle:
The neutral plate must be applied to the patient and connected to the equipment
for monopolar techniques. The Surgitron
®
Dual/EMC is equipped with a neutral
plate safety monitor which monitors the electrical connection between the neutral
plate and the unit, as well as between the neutral plate and the patient.
Neutral LED Indicator:
The indicator lights up Red and triggers an audible alarm if the neutral plate is not
properly applied. The LED indicator will turn to Green when the neutral plate is
correctly applied. This function is automatically bypassed if Bipolar mode is
selected.
Bipolar Cord Receptacle:
Bipolar function can be activated by footswitch only.
Fingerswitch/Handpiece Receptacle:
The Fingerswitch/Handpiece Receptacle accepts any monopolar handpiece that
is compatible with the Surgitron
®
Dual/EMC.
Yellow Footswitch Indicator:
The light indicator will be ON only when the CUT
control footswitch pedal is depressed in Surgitron
®
Dual/EMC model.
Blue Footswitch Indicator:
The light indicator will be ON only when the COAG control footswitch pedal is
depressed in Surgitron
®
Dual/EMC model.
9
Cutting Mode Function Select Button:
It is for selecting Cut or Blend functions.
Yellow Light (Cut) Indicator:
The indicator illuminates when Cut function has
been selected.
Yellow Light (Blend) Indicator:
The indicator illuminates when Blend function
has been selected.
Output Power Intensity Indicator for Cutting Mode:
The default state is zero
when On/Off power switch is turned on. The output power will remain at the
selected level unless it is changed. The number displayed indicates the relative
power, which will be delivered to the patient when the mode is activated. For true
output power, see figures in Section 7.
Power-up Button for Cutting Mode:
A single depression of the button switch
increases the power setting by one. Continuous depression gradually increases
the power to maximum - 100.
Power-down Button for Cutting Mode:
A single depression lowers the power
setting by one. Continuous depression gradually decreases the power to
minimum - 0
.
2
4
5
6
7
8
10
11
12
13
14
