Holiday Neptune 2004, Руководство пользователя

Страница: 218 / 416

To Deflate the Mattress:
1. Remove bedding items.
2. Unzip the corner of the mattress where the air valve is located.
3. Lift the valve release.
4. Once deflated, close the valve release, zip the mattress cover and close
the convertible sofa.
Electric Bed:
The newest generation of sofa sleeper is the electric bed. This sofa uses 12 Volt
DC to operate the slide mechanism.
The dinette booth easily converts into a bed:
• Lift seat cushions to an angled vertical position.
• Firmly grip and lift up the front edge of the
table approximately six inches. Push table leg
lock to side.
• Swing the table leg up and lock into a horizontal
position.
• Continue lifting table until table stays are clear
of retainers. Pull outward and lower table down.
• Use both seat cushions and one back cushion
for a mattress. Leave one back cushion in a
vertical position.
• Reverse the procedure to convert back to a
dinette table.
When the dinette booth is in the table configuration, it is possible to slide
tabletop from the front to the rear along the wall. Lift the table slightly to raise the
table leg. Adjust the tabletop towards the desired direction. Lower the tabletop,
ensure the table leg is in the vertical position.
For convenience, the dinette table is designed with a few unique features.
Along with room for storage of small items, the table is also adjustable. The table
can be extended for more table space. When preparing for travel the extra table
leaf can be removed and the table retracted.
WARNING: Do not occupy the dinette booth, if not equipped with
safety belts, or the dining chairs while the motorhome is in motion. To
avoid personal injury to occupants in case of a crash or sudden stop,
chairs must be stored in an enclosed area or secured with tie down
straps while the motorhome is in motion.
218 • SECTION 5 --- EQUIPMENT NEPTUNE 2004
DINETTE BOOTH
020163