Holiday Neptune 2004, Руководство пользователя

Страница: 201 / 416

The main slide-out room operates by an electric switch which controls an
electric motor. Slide-out room operation uses many safety features preventing
mechanical damage or physical harm. The slide-out room(s) will not operate until
all safety requirements are met.
The design of the slide-out system requires very little maintenance. To ensure
long life of the slide-out system, follow these simple guidelines:
• Inspect the roof of the slide-out for debris such as pine needles, dirt,
leaves, sticks, etc. Any debris left on the top may cause damage to
the seals when being retracted. If debris is present wash with soap and
water, then rinse.
• When the room is out visually inspect the wipe seal. The seal should
be clean and free of dirt or other foreign material. Inspect the seal
for tears.
• In the event the slide-out room leaks, fully retract it. If necessary,
tape the exterior opening closed with duct tape until repairs to the
motorhome can be completed.
• Open a window or a vent to equalize pressure during slide-out
operation.
NOTE: Do not use petroleum-based products on the slide-out
seal. Petroleum based products can damage the paint and will
cause premature aging of the rubber seal.
WARNING: Move the driver's seat forward before activating
the slide-out room. Damage to the upholstery can occur. The
outside area must be clear of any obstructions restricting slide-out
room operation. Ensure there is five or more feet of clear space
outside the slide-out room prior to extending or damage can
occur. When retracting the slide-out room, ensure there is
sufficient clearance inside the motorhome. Never move the
motorhome with any slide-out room extended.
CAUTION: Continuous operation of the slide-out room can
drain the batteries and damage the motor from overheating.
EQUIPMENT --- SECTION 5 • 201
NEPTUNE 2004
5
SLIDE-OUT
- Operation