HOLDEN Equinox LS, Руководство пользователя

Страница: 102 / 354

Holden Equinox Owner Manual (Holden-Localizing-Holden-12561772) -
2019 - crc - 6/26/18
100 Instruments and Controls
Caution (Continued)
not be as good, and the engine
might not run as smoothly. This
may lead to costly repairs that
might not be covered by the
vehicle warranty.
Modifications made to the engine,
transmission, exhaust, intake,
or fuel system of the vehicle can
affect the vehicle's emission
controls and can cause this light
to come on. Modifications to
these systems could lead to
costly repairs not covered by the
vehicle warranty.
If the light is flashing (petrol
engines only) :
A malfunction has
been detected that could damage
the emission control system and
increase vehicle emissions.
Diagnosis and service may be
required.
To help prevent damage, reduce
vehicle speed and avoid hard
accelerations and uphill gradients.
If towing a trailer, reduce the
amount of cargo being hauled as
soon as possible.
If the light continues to flash, find a
safe place to park. Turn the engine
off and wait at least 10 seconds
before restarting the engine. If the
light is still flashing, follow the
previous guidelines and see your
dealer for service as soon as
possible.
If the light is on steady (all
engines) :
A malfunction has been
detected. Diagnosis and service
may be required.
Check the following:
.
A loose or missing fuel cap may
cause the light to come on.
See
Filling the Tank (Petrol
Engines) 0 244 or Filling the
Tank (Diesel Engine) 0 245 .
A few driving trips with the cap
properly installed may turn the
light off.
.
Poor fuel quality can cause
inefficient engine operation and
poor driveability, which may go
away once the engine is warmed
up. If this occurs, change the
fuel brand. It may require at
least one full tank of the correct
fuel to turn the light off. See
Fuel
0 238 .
If the light remains on, see your
dealer.
Brake System Warning
Light
The vehicle brake system consists
of two hydraulic circuits. If one
circuit is not working, the remaining
circuit can still work to stop the
vehicle. For normal braking
performance, both circuits need to
be working.
If the warning light comes on, there
is a problem with the braking
system. Have the brake system
inspected right away.