HOLDEN Equinox LS, Руководство пользователя

Страница: 110 / 354

Holden Equinox Owner Manual (Holden-Localizing-Holden-12561772) -
2019 - crc - 6/26/18
108 Instruments and Controls
Use
w
or
x
to scroll through items
in each page.
Note
Some of the displayed functions
may differ when the vehicle is being
driven or at a standstill.
Trip Page Items
Speed : Displays vehicle speed in
kilometres per hour (km/h).
Trip 1 or Trip 2, Average Fuel
Consumption :
Displays the
distance travelled in kilometres (km)
since this page was reset.
Also displays the approximate
average fuel usage in litres per 100
kilometres (L/100 km) recorded
since the last time this page item
was reset. This number reflects only
the approximate average fuel
economy the vehicle has right now,
and will change as driving
conditions change. Reset by
pressing
V
while this page is
displayed.
Fuel Range : Displays the
approximate distance the vehicle
can be driven without refuelling. The
fuel range estimate is based on an
average of the vehicle's fuel
economy over recent driving history
and the amount of fuel remaining in
the fuel tank.
Average Vehicle Speed : Displays
the average speed of the vehicle in
kilometres per hour (km/h). This
average is based on the various
vehicle speeds recorded since the
last reset. Reset the average speed
by pressing
V
when it is displayed.
Timer : To start the timer, press
V
while Timer is displayed. The
display will show the amount of time
that has passed since the timer was
last reset, not including time the
ignition is off. Time will continue to
be counted as long as the ignition is
on, even if another display is being
shown on the DIC. The timer will
record up to 99 hours, 59 minutes,
and 59 seconds (99:59:59) after
which the display will return to zero.
To stop the timer, press
V
briefly
while the Timer is displayed. To
reset the timer to zero, press and
hold
V
.
Blank Display : Displays no
information.
Vehicle Page Items
Remaining Oil Life : Displays an
estimate of the engine oil's
remaining useful life. If 99% is
displayed, that means 99% of the
current oil life remains.
When the remaining oil life is low, a
Change Engine Oil Soon message
will be displayed. The oil should be
changed as soon as possible. See
Engine Oil 0 262 .
The oil life display must be reset
after each engine oil change. It will
not reset itself. Do not reset the
display at any time other than when
the oil has just been changed.
It cannot be reset accurately until
the next oil change. To reset the
engine oil life system, press
V
while
the Oil Life display is active. See
Engine Oil Life System 0 264 .
Oil Pressure : Oil pressure is
displayed in kilopascal (kPa). Oil
pressure can vary with engine
speed, outside temperature, and oil