Hohner ECONOMY 25/40, Руководство по эксплуатации

Страница: 31 / 57

Operation
Hohner Maschinenbau GmbH ECONOMY 25/40 02/2016 31
4.6 Exchanging the driver and bender
- Fig. 4.6 -
The ECONOMY 25/40 processes stitching wire of standard quality:
KIT coarse
Round wire no. 21 - 25 and
Flat wire no. I - VI
KIT fine
Round wire no. 24 - 30
The machine is delivered with an integrated KIT coarse , consisting of:
• Art. no. 31 35 536 Driver -59-
• Art. no. 31 35 538 Bender, left -67a-
• Art. no. 31 35 539 Bender, right -67b-
To produce a very fine stitching, integrate KIT fine , consisting of:
• Art. no. 31 35 547 Driver -59-
• Art. no. 31 35 548 Bender, left -67a-
• Art. no. 31 35 549 Bender, right -67b-
4.6.1 Exchanging the two KITS
- Fig. 4.6 -
- Pivot the leaf spring -19-, remove finger guard -20- and former -21-. Turn down the main
slide bar -22- until the above slotted cheese head screw -23- of the right bender is visible.
- Loosen the slotted countersunk head screw -24- of the switch finger -25- and all screws from the
driver and the benders, and exchange the kit.
- Mount the finger guard in the correct position and note the markings (see 3.2).
Before switching on the machine, make sure that all protective devices are fit-
ted to the machine and all tools have been removed from the machine!
Quick stroke movements of the stitching heads!
Danger of crushing!
 Before carrying out maintenance or repairs, take care that the power supply is switched off
and prevented from being switched on again accidentally.
 Never operate the system without properly mounted finger guard.