Hog Technologies Stripe Hog SK3000, Руководство по эксплуатации

Страница: 10 / 108

10
Safety Information
WARNING
WARNING
Be Prepared
If the equipment malfunctions or a malfunction is
suspected, immediately stop all blasting activity
and relieve the pressure in the system before at-
tempting any repair. Always follow manufacturer’s
repair instructions.
Notice:
Use Only Thoroughly Trained Personnel to
Perform Maintenance or Repairs
Low Pressure Test
Following repairs, operate the system at low pres-
sure for a test. Bring equipment up to operating
pressure slowly.
Freezing Conditions
System hoses and Hog Head assemblies should
be drained of all water or filled with an anti-
freeze solution. For 40K waterblaster, refer to
pump manufacturer’s procedures for maintaining
equipment in freezing climates. If you do de-
cide to operate at freezing temperatures or even
temperatures below 60 degrees Fahrenheit, you
will need to run system with the high pressure
pump engaged at IDLE speed only, under load,
until the oil temperature rises above 60 degrees
Fahrenheit.
Store Components Properly
Protect all components from damage when not in
use. Secure for travel.
1.2 Blasting Safety
Safety First – ALWAYS!
Whenever pump is engaged for setting pressure
or operations, always be sure work area is clear
of people, hands, feet, etc., before engaging the
high pressure switch.
INjURIES FROM ULTRA HIGH PRESSURE wATERBLASTING
cAN BE VERY SERIOUS AND cAN RESULT IN A FATALITY.
ALwAYS MAKE SURE ALL PERSONNEL ARE A SAFE DISTANcE
FROM THE wORK AREA BEFORE THE PRESSURE PUMP IS
ENGAGED. NEVER PUT HANDS, FEET OR ANY PART OF YOUR
BODY IN OR NEAR THE HIGH PRESSURE STREAM.
Check Hog Head
Check the Hog Head for smooth and proper op-
eration before each shift. Do not use equipment
that has not been checked thoroughly.
Check Stripe Hog Control Components
Check all switches and control panel devices to
ensure each is working properly before beginning
operations. Do not use equipment if any device
is malfunctioning.
Stripe Hog Tractor Brake
Always set the tractor brake before beginning
any testing, pressure testing system or
blasting. The force from blasting head can
move tractor backwards causing blast to cross
the path of people or equipment.
Use Safety Protection
Always use eye protection from projected debris.
Use ear protection to protect from noise levels
generated from pump, vacuum and hog head
blasting.
ULTRA HIGH PRESSURE BLASTING cAN cAUSE DEBRIS TO
BE PROjEcTED UNEXPEcTEDLY IN AND AROUND THE wORK
AREA THAT cAN cAUSE SEVERE INjURY. MAKE SURE ALL
PERSONNEL STAY wELL cLEAR OF THE BLASTING AREA AND
USE HARD HATS, EYE AND EAR PROTEcTION.
Typical Hog Head